Giovani Engineering

Hey guys! I'm back with another project that I learned in my machines and tools class. There are only a few school days left, and I decided I  wanted to make one last project before the school year was over. So I present to you, how you can do your own dustpan.  Q: Awesome!! So what is the first step? A:Well before you even start touching any tools, make sure you know how you want it to look. Make sure to do a paper cut, just like i did. If you do you will  at least know the dimensions of what your working on.

Hello again, I'm back with another post for my blog. These last couple of weeks I've been in the process of  learning a new skill from my machines and tools class. I learned how to weld! In this post I will also show you the steps so you can also weld.  Q:So what's the first step? A: First things first, I started off by looking around the room for some metal I could use. I found a piece but it was huge in length so I had to cut it down into several pieces.  Q:How did you cut down the metal into several pieces? A: The way I cut it down is by using this saw that is used specifically for this type of job. It is a metal cut-off saw. I had to cut off the pieces by four inches long. Q: What type of safety precautions did you take while handling this type of machinery?

While I was working on some class projects, I noticed that most sheet metal that was lying around was covered in rust. Which meant that I could not use the metal because its appearance would make my project look bad. Although I could ignore the pieces covered in rust, I decided to do something about. I am going to use a specific tool that removes most rust and any other thing that is on the surface. Question: What tool removes rust from sheet metal? Answer: The machine above is called a Sand Blaster Cabinet. The machines spray gun shoots little sand particles fast enough to remove all stains and rust.

1)What project or tool are you working on? Answer: The tool i'm using is a combination of  Shear  Press,  Brake  & Slip  Roll.  2) How do you use this project or tool?